New To Bikes

Discussion in 'Newbies Hangout' started by Will Holman, Sep 11, 2018.

  1. Will Holman

    Will Holman New Member

    Sep 10, 2018
    14
    3
    Cambs, UK
    #1 Will Holman, Sep 11, 2018
    Last edited: Sep 11, 2018
    I wasn't allowed one as a youngster and was steered straight on to cars. I've been building and fiddling with them ever since, but this spring decided to get a bike licence – and an old bike.



    [​IMG]

    [​IMG]

    s-l1600_Snapseed.jpg

    s-l1600-1_Snapseed.jpg

    s-l1600-2_Snapseed.jpg

    s-l1600-3_Snapseed.jpg

    s-l1600-4_Snapseed.jpg

    s-l1600-7_Snapseed.jpg

    s-l1600-8_Snapseed.jpg
     
    • Like Like x 8
  2. Yorkshireman

    Yorkshireman Crème de la Crème

    Dec 12, 2015
    3,400
    1,000
    Barnsley
    Hello Will and a warm welcome to the forum. Glad you got into bikes in the end, what’s your plan with the bonnie, ride as is or restore.
     
  3. Vulpes

    Vulpes Confused Member

    Mar 14, 2018
    19,232
    1,000
    Netherlands
    Hi and welcome.
     
  4. dilligaf

    dilligaf Guest

    Hi mate and welcome
    Where’d you find that :eek:
     
  5. Will Holman

    Will Holman New Member

    Sep 10, 2018
    14
    3
    Cambs, UK
    It was on eBay earlier this summer. It had stood for 20 years after being imported from the States.

    I've finally got it running just about right (although the carbs are currently in bits after I put them in a mate's ultrasonic cleaner). I'm torn about leaving it basically as is, or restoring it. At the moment I'm swinging towards the former, with maybe a coat of lacquer on the tank just to keep it where it is. But I'd like to strip the engine and get it properly balanced. A mate had his apart and did this – the factory was literally throwing them together by this point, and it'd be nice to reduce the vibes a bit.
     
    • Like Like x 2
  6. mpllineman

    mpllineman First Class Member

    Feb 12, 2018
    826
    500
    Pearl,Ms.
    Good morning and welcome to the world of motorcycling. You have the beginnings of a great project. Whatever your decision, enjoy the ride and remember to always ride safe!
     
    • Agree Agree x 1
  7. Will Holman

    Will Holman New Member

    Sep 10, 2018
    14
    3
    Cambs, UK
    Thanks for the welcome. As for riding safe, I ride like a little old lady. I still haven't really got the measure of this biking thing, so I'm taking it easy – which isn't hard on this bike!
     
    • Like Like x 2
  8. Help me Obi Wan...

    Help me Obi Wan... Well-Known Member

    Welcome, but remember, it's only old once and has that patina once. Unless you fancy throwing tons of money down a bottomless hole to turn it into a trailer queen. Been there and have got the cuts, scabs, and vocabulary to prove it.
     
    • Like Like x 1
    • Agree Agree x 1
  9. Will Holman

    Will Holman New Member

    Sep 10, 2018
    14
    3
    Cambs, UK
    I agree. I think I'll lacquer the tank and I may well strip the engine, but I won;t be getting into any polishing.
     
    • Like Like x 2
  10. Help me Obi Wan...

    Help me Obi Wan... Well-Known Member

    Change the obvious, and ride it. By the way, people would pay through the nose to have a bike in that condition or at least pay someone to make it "used".
     
    • Agree Agree x 1
  11. Hack Driver

    Hack Driver Well-Known Member

    Oct 12, 2017
    455
    63
    Denton, Maryland USA
    Welcome to the forum! You've got a great project bike. :)
     
  12. Tucker 1963

    Tucker 1963 Elite Member

    Sep 7, 2017
    3,449
    800
    Newmarket
    Welcome to the Asylum you should fit right in. _20180906_154049.jpg Tucker
     
  13. Angus

    Angus Noble Member

    Mar 19, 2017
    936
    300
    South Africa
    Hi Will and welcome ! Lovely bike you got there, the possibilities is endless! Enjoy the forum and your first bike !
     
  14. adethetrade

    adethetrade Active Member

    Nov 20, 2016
    114
    43
    cannock
    Hi and welcome in, if you are looking for any parts the tomcc have a bonneville 60th anniversary this weekend at Uttoxeter Racecourse
    Ade
     
  15. David Cooper

    David Cooper Triumph Rocketeer.
    Subscriber

    Hello and welcome Will

    hi.gif
     
  16. R_1000

    R_1000 Elite Member

    Sep 2, 2016
    1,476
    700
    UK, London
    Welcome buddy :)
     
  17. Will Holman

    Will Holman New Member

    Sep 10, 2018
    14
    3
    Cambs, UK
    I'm away this weekend or I might have gone to that bash. I could do with a new kill switch assembly.
     
  18. Tiglet

    Tiglet Vintage Member

    Mar 28, 2016
    4,434
    1,000
    Cheshire
    Hello Will and welcome to the forum :)
     
  19. crispey

    crispey crispey creme de la creme

    Nov 6, 2014
    7,258
    1,000
    Uk
    welcome in
     
  20. R.G.D. Allen

    R.G.D. Allen New Member

    Sep 14, 2018
    0
    1
    Northern Ireland
    Hi. Just to let you I booked on to the Forum to spy on others who have various problems with their bikes and Steal there advice. I own 4 Triumph Triples modern and classic. As a mechanic i treat them with respect in the W/shop and ring there necks on rhe road/track. I have a LAUNCH for Cars but whzy zo I buy to reset the service light. etc ps my T160 dont need thos trickery. ☘ Tegards Dougie.
     

Share This Page