Tons Of Bits For Sale - 1992 Sprint / 1998 Trophy

Hi Folks, I have most parts for a 1992 sprint, a complete set of bodywork for a 1994 sprint and most parts from a 1998 Trophy, including full body panel set and a set of genuine Triumph luggage in blue. I don't have the Trophy engine - it's kernackered but I do have most other bits. If anybody wants anything give me a shout, I will sell at ebay prices minus 10%. I can post most stuff to UK at buyer's cost. Admins - I hope this is ok, if not please message me, I don't want to upset any apple carts.

 

Hiya, do you have a bank of carbs for a 1996 trophy 900.

 

Hi Zak, I have a set of 3 Kei Hins available. I can do them for £150 plus post. Regards, Dave.

 

Hey up mate,How much will you want for the petrol tap if I cant fix what ive got lol

 

My trophy was running mikuni carbs, I assume the kei hins would be set up for an earlier bike and run without problems ?

 

Don't know what DD's reply was about, what's of interest !!

 

DD was letting us know about this thread in case it was of interest.

 

Sorry I really do have to wake up. Ha ha

 

I'm pretty sure the Mikunis have a different size on the inlet side so your air filter wouldn't fit the Keihins. The two set ups are interchangeable, they use the same throttle and choke cable and are the same size on the engine side but Im fairly certain they are different on the air filter side.

 

Thanks for the info, maybe I will try to get a set of mikuni carbs as that was what was fitted as standard, the right hand side carb is the problematic one, the centre and left hand side are good.
just purchased another trophy on thursday, insured, MOT'd and taxed it yesterday, taking it a ride out today.

 

Air filter box is the same the difference is in the airbox to carb & carb to head rubbers for the two sets of carbs

 

That sounds right. Cheers.

 

That looks rather nice. I am now left with a complete trident, a soon to be cafe racered Trophy and about 30% of a Sprint. And some bits

 

Hi, Thorcusmodee.
I realise that this is a forlorn hope, but ...... deep breath ..... have you got such a thing as a yellow rectangular reflector (9cm x 2.5cm) which fits on the side of the radiator cowl - the plastic cover on each side? One of mine went AWOL after I removed it to get at the radiator cap for a coolant change. Obviously I didn't weld it on properly when I re-attached it and it did a runner! Bugger!!
Thanks.

 

What state are the Trophy front brakes in? Are they they black 4pots?

I would be interested in Calipers, Master cylinder, lines and disks. Rough price?

 

Sorry, I used all of that on my Cafe racer project.

 

Yeah, I've got one of them. It will need a double sided sticky pad to fix it to the cowl. It's just the plastic insert though so I don't know how you could weld it

 

PM sent.