Thruxton 900 Bits And Pieces - Shocks/exhaust, Booster Plug + Misc

Discussion in 'Parts, Accessories & Clothing' started by JungleGus, Feb 2, 2018.

  1. JungleGus

    JungleGus New Member

    Joined:
    Feb 20, 2017
    Messages:
    13
    Likes Received:
    9
    Trophy Points:
    3
    Location:
    London
    After a series of upgrades to my bike, I've got a few bits and bobs floating about I'd like to get rid of. Most of these came off at around 2000 miles (2014 Thruxton 900) so are in pretty good nick. I was originally holding onto them in case I ever wanted to return bike to standard, but that's looking very unlikely so may as well make space!

    Hopefully I've got the prices OK, I'll leave thread open and take offers if not.

    Standard Front Springs - £20
    [​IMG]
    Standard Rear Shocks - £50
    [​IMG]
    Full Exhaust System + Mufflers (currently heatwrapped) - £175
    [​IMG]
    [​IMG]
    Booster Plug - enriches fuel mixture 6% and SUPER easy to install. £130 new, £70
    [​IMG]
    Standard Mirrors - £30
    Ignition Relocation Bracket (pictured is the main bracket but I have the little bits and pieces also) - £10
    [​IMG]
     
    #1
  2. bob

    bob New Member

    Joined:
    Apr 12, 2015
    Messages:
    13
    Likes Received:
    3
    Trophy Points:
    3
    Location:
    kernow
    hi
    is the ignition relocation/clock bracket, std angle or lay flat?
    i could be interested in it if its lay flat and possibly the booster too
    cheers
     
    #2
  3. JungleGus

    JungleGus New Member

    Joined:
    Feb 20, 2017
    Messages:
    13
    Likes Received:
    9
    Trophy Points:
    3
    Location:
    London
    It's pretty much the standard angle - there is a block around 1cm tall that acts as a wedge between where it bolts to the bike and the bracket in the photo

    booster plug still available
     
    #3
Loading...

Share This Page