Great write up in this week's MCN on the T765i we've built at Pure Triumph Woburn which they tested recently at Cadwell Park. I'll take a copy and post here if they send us a PDF we can use. I'll edit in the full spec soon. In the meantime performance increased from 123bhp t 138bhp at the rear wheel. Could have been more, but we've erred on the cautious side. Uprated shocks and front springs and stuff. Fairly much standard fairings borrowed from the old Daytona. Standard Street Triple RS with some carbon panels, tail tidy etc. Standard Daytona 675 R fairing. Italian SC Project competition exhaust (like Marc Marquez's Honda RC213V) cuts off 4.7kg. Power Commander and remapped on BSD Peterborough's dyno. MCT Stowmarket breathed-on standard supsension - heavier springs, different oil and stuff. Racing top yoke and clip ons. Pirelli Super Corsa BSB tyres. And more. All yours for £14,100 Less if you have the R or S converted. There's a story behind this I'll share at the GMU if anyone is still interested. And before some smart@rse (I'm looking at youse figwold and Privateer) makes a comment, yes photo two is the way I usually see a bike, lying on its side.
Hi mate, a brand new RS fitted out as per the picture and as described in the MCN write-up is £14,100. But it's completely customisable to buyer's spec - each is a one-off. As you're only up the road in Northampton why not pop down to Woburn and talk directly to Paul (not on Tuesdays cos it's his day off). Pricing will all depend on the level of conversion you're looking for. Or give him a call on 01525 292490. Mention me and the Triumph Forum if you do. The one pictured is our ex-demo RS with 3,500 miles on the clock (and test ridden at Cadwell), hence only £12,995, on a 17 plate and ready to go. I tell you, the sound of the exhaust note alone is worth at least a grand of that
Thank you for the info RB but I wouldn't buy anything from Woburn Triumph. I already have a 765RS and may have a look at doing this myself.
Hi, To the OP, if you can enlighten me: Are the Daytona fairings Plug and Play? Do the mounting holes align correctly or do I need to modify it in any way? I have just purchased an RS as a second bike and am looking forward to convert it just like that. Thanks
There's quite a bit of work involved round the clock cluster. Easy, if time consuming, if you know what you're doing.
Can we get some details on the engine mods done in order to get that HP figure? Airbox mods? Any dyno sheets you can post?
A hint to a place where to look would also be very helpful Not asking for super specific details here
As I said, I'll ask. Be patient, we work on minimum staffing levels so rarely are off the phone or not dealing with customers at the same time to get time to chew the fat on non urgent stuff.