Finished Spending Money (i Think)

Discussion in 'Bonneville' started by Andy-K2, Oct 27, 2017.

  1. Andy-K2

    Andy-K2 Knowledge is power for which I have neither!

    Apr 26, 2017
    324
    113
    Bristol UK
    #1 Andy-K2, Oct 27, 2017
    After buying my Bonneville in June this year a short period after that I went in for surgery so have been unable to ride it due to recovery etc. With that in mind I had plenty of time to sit on eBay etc to look for bits and bobs. As I was recovering I was lucky to have the help of my cousin (Rudeboy) who is a wiz kid with a spanner.

    Over all I'm done with the spending, anything else will have to be made, the seat bolts were made from a couple of spent.303 cases with some M6 threaded bar Epoxied in. The keener eye will notice one of the bar end mirrors is missing, this is with my brother-in-law who is an engineer, he is customising the mirror to give me a better view as I can see too much of my forearm and not enough of the road behind, I guess a diet might help

    054.JPG

    055.JPG

    057.JPG

    058.JPG

    060.JPG

    061.JPG
     
    • Like Like x 4
    • Funny Funny x 1
  2. dilligaf

    dilligaf Guest

    #2 dilligaf, Oct 27, 2017
    That's a nice bike mate but if I were you I might want to spend a bit of money on it :rolleyes:
     
    • Funny Funny x 3
    • Like Like x 1
  3. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #3 Rudeboy, Oct 27, 2017
    Shes looking proper nice now I wonder who bodged they tank pads on :sob:
     
    • Funny Funny x 1
  4. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #4 Rudeboy, Oct 27, 2017
    With a good roughing up with production paper pad and tank surfaces swabbed with some alcohol wipes and strips of well strong double sided tape neatly butted up joints put on pad then trimmed around joint effort that tape is damn good from screwfix sticks like shyte to a blanket :)
     
    • Like Like x 2
  5. Sir Trev

    Sir Trev Senior Member

    May 27, 2017
    684
    193
    Buckinghamshire
    #5 Sir Trev, Oct 27, 2017
    You might want to wash the number plate before going for a ride - looks like it's got some mould or similar furry gunge all over it...
     
    • Like Like x 1
    • Funny Funny x 1
  6. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #6 Rudeboy, Oct 27, 2017
    Fair shout I typed that without even reading Andys previous stuff I aint even a mind reader it works though dont think they coming off in a hurry best to remind all readers and members that Screwfix is not a dating agency :cool:
     
    • Funny Funny x 2
    • Useful Useful x 1
  7. stevethegoolie

    stevethegoolie Elite Member

    Oct 16, 2014
    2,456
    800
    East Riding of Yorkshire
    #7 stevethegoolie, Oct 27, 2017
    WHAT????? Oh bugger!:sob:
     
    • Funny Funny x 4
  8. Oldyam

    Oldyam Grumpy Old Git

    May 14, 2017
    610
    500
    ireland
    #8 Oldyam, Oct 27, 2017
    At least he's an optimist " Finished Spending Money ":joy::joy::joy::joy:
     
    • Funny Funny x 2
    • Agree Agree x 2
  9. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #9 Rudeboy, Oct 27, 2017
    I fear hes only just started theres the front screen,panniers,intercom and satnav thats just for starters
     
    • Like Like x 1
  10. Andy-K2

    Andy-K2 Knowledge is power for which I have neither!

    Apr 26, 2017
    324
    113
    Bristol UK
    #10 Andy-K2, Oct 27, 2017
    I have mate, she'd kill me if I spent another penny :):) however forgiveness is easier to obtain than permission so there could be another few things that could be on the cards :p

    Good job she don't read this Nick :p
     
    • Like Like x 1
  11. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #11 Rudeboy, Oct 27, 2017
    I reckon shes blaming me already bad influence
     
  12. Andy-K2

    Andy-K2 Knowledge is power for which I have neither!

    Apr 26, 2017
    324
    113
    Bristol UK
    #12 Andy-K2, Oct 27, 2017
    And the same for yours mate :):):):):):):)
     
  13. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #13 Rudeboy, Oct 27, 2017
    Yeah it gives them something to chat about though I figured ;)
     
    • Funny Funny x 1
  14. Essexboy

    Essexboy Active Member

    Apr 16, 2017
    197
    43
    Essex
    #14 Essexboy, Oct 31, 2017
    I like the cartridge case idea, looks pretty smart :) I'm in a similar position at the mo, stuck at home with an knackered wrist so I can't work and I can't ride so I'm messing about with my bike too - only trouble is I have very limited funds so it's mainly being done with whatever I can find in my shed lol!
     
    • Like Like x 2
  15. Kinjane

    Kinjane Well-Known Member

    Oct 15, 2017
    255
    63
    Bristol, Land of Enger
    #15 Kinjane, Oct 31, 2017
    Last edited: Oct 31, 2017
    Needs a TTP tune
    I happen to have the TTP OBD-2 USB Cable you need ;)
     
  16. Andy-K2

    Andy-K2 Knowledge is power for which I have neither!

    Apr 26, 2017
    324
    113
    Bristol UK
    #16 Andy-K2, Oct 31, 2017
    That’s how the cartridge case idea came about, seat bolts are £19.00 and to be fair that a lump of cash I thought was a waste of money. I had the M6 threaded bar, cartridge cases were easy come by so I Epoxied the bar into the case. I deliberately chose .303 because as far as I’m concerned it’s a British round so belongs on the Triumph lol

    E19CF557-92C4-4741-96EA-287462E0096D.jpeg
     
    • Like Like x 5
  17. Essexboy

    Essexboy Active Member

    Apr 16, 2017
    197
    43
    Essex
    #17 Essexboy, Nov 1, 2017
    I'm quite lucky there as I served a toolmaking apprenticeship so I'm fairly experienced in metalwork-the wife's not so lucky though as I'm hopeless at decorating and woodwork so I can't do much around the house lol!
     
    • Funny Funny x 2
    • Like Like x 1
  18. steve lovatt

    steve lovatt Something else

    May 12, 2014
    9,230
    1,000
    North Yorkshire
    #18 steve lovatt, Nov 1, 2017
    You've never finished spending money on a Bonneville! :cool:
     
    • Funny Funny x 2
    • Like Like x 1
  19. Rudeboy

    Rudeboy Senior Member

    May 2, 2017
    402
    113
    Bristol
    #19 Rudeboy, Nov 2, 2017
    Hi Dont suppose the maps are available anywhere like tune ecu ones are they or is it a case of send the brain to them
     
Loading...
Similar Threads - Finished Spending Money
  1. Markus

    The Te-01 Prototype Is Finished

    Markus, Feb 10, 2022, in forum: Triumph General Discussion
    Replies:
    12
    Views:
    1,769
    Pegscraper
    Feb 13, 2022
  2. martinm

    Nearly Finished Tinkering

    martinm, May 7, 2021, in forum: Speed Triple
    Replies:
    5
    Views:
    1,995
    martinm
    May 9, 2021
  3. Greywolf55

    Customized Belly Pan Finished

    Greywolf55, Jul 21, 2020, in forum: Builds & Projects
    Replies:
    6
    Views:
    1,327
    Wessa
    Aug 8, 2020
  4. Bad Billy

    For Those That Hadn't Finished Ignoring The Thread To Be Ignored!

    Bad Billy, Jul 2, 2019, in forum: Lounge
    Replies:
    66
    Views:
    5,684
    Don the Don
    Nov 18, 2020
  5. Garyg

    Finished Project 955i Daytona

    Garyg, Jun 6, 2017, in forum: Builds & Projects
    Replies:
    18
    Views:
    2,538
    Uncorrugated
    Jun 12, 2017

Share This Page

Sign up