Triumph Sprint Ecutune Ecu Not Responding

Hi guys,
Triumph sprint 955I 2001,was riding home last week engine management light come on for split second and the engine just cut out. I 've noticed that I've lost sum of my dashboard hazard check lights when turning the ignition on.I 've lost the fuel management light and fuel light. I stil have the oil light.checked fuses, checked fuel pump,installed ecutune Android to my tablet and hooked it up to the bike.and I m getting ecu not responding. I d be really greatful for any feed back

Marc

 

On line its the lonlec cable

 

Checked the fuses had a quick look at bits of wiring but can't see anything

 

Hi

The bike turns over but won't fire!!! Otg is that the adptor you use to plug the lonlec cable in your tablet?find it strange how I 've lost 2 of me dash board lights.

 

Wasn't possible to connect a charger cos of the location.so I wired a second battery to the bike.need get the bike back home really.

 

Sum guy on one of the forum sites says with the fuel pump not priming it cud be a relay. Hr says swap the fan relay with the ecm relay.is this possible???

 

Are all relays the same is it possible to switch them over